Star Trac E-RBi, E-STi, E-TBTi, E-UBi, E-TRi manual Step

STEP 21.

Feed the headphone jack cable from the PVS display neck through the hole in the front dis- play plastics where the blank cover was re- moved earlier.

STEP 22.

Take the entertainment headphone jack from the PVS kit and attach it to the cable that is hanging out of the front of the display. Make sure the connector is seated all the way into the jack. Now slide the jack into the front of the dis- play. Using a #2 Phillips screwdriver, fasten the headphone jack into the front display with the screw that was saved from the earlier step.

STEP 23.

Now that all the cables are in their places, and confined to the post on the display mount, place the display front plastic onto the back. Make sure the bottom of the display front is under the 2 tabs on the display mount. Press the front dis- play against the round tube and rotate it to the back. Be careful not to pinch any wires.

17 620-7991 Rev 002