Star Trac E-TBTi, E-STi, E-RBi, E-UBi, E-TRi manual Step, Retain screws for later use

You can use the foam bag that ships inside the Personal Viewing Screen package to place the display face onto. This will help protect it from being damaged.

STEP 4.

Remove the cap cover with the Star Trac logo from the back cover plastics by removing the (2) screws using a #2 Phillips screwdriver. Retain the screws for later use.

You will no longer need the cap cover and, if desired, you can store it away for any possible future use.

STEP 5.

Remove the (2) M8 buttonhead screws retaining the cross-brace using provided 5mm Hex key.

Retain screws for later use.

You will no longer need the cross-brace and, if de- sired, you can store it away for any possible future use.

STEP 6.

It is now time to install the Personal Viewing Screen. Remove the PVS with its mounting bracket and cables from the packaging. Also re- move the (2) M8 buttonhead screws from the hardware kit in the packaging.

11 620-7991 Rev 002