Star Trac E-TBTi Step, Take the coax cable 1 and feed it all the way down the treadmill neck

STEP 8.

Now that the PVS is mounted onto the tread- mill, you need to route the wires to their proper places:

•Take the coax cable 1 and feed it all the way down the treadmill neck.

•Feed the DC power cable 2 from the tread- mill neck through the center console hole.

(E-TR ONLY)

•Next take the headphone jack cable 3 from the PVS neck and connect it to the headphone jack.

• Now feed the other (3) cables 4 through

the display and out the center console hole.

STEP 9.

Take the entertainment center console from the PVS Kit.

STEP 10. (E-TRx ONLY)

Take the E-TR headphone jack from the PVS kit. Disassemble the headphone jack. Retain the screw and the board.

Take the entertainment center console from the PVS Kit. Flip it over so you are looking at the back side.

Mount the headphone jack board to the center console using the screw from earlier.

NOTE: The headphone jack must be mounted as seen to reduce interference.

Once the center console has been mounted into the display connect the head phone jack to the appropriate jack as noted.

21 620-7991 Rev 002