Star Trac E-TRi, E-STi, E-TBTi, E-RBi INSTALLING YOUR PVS ON THE E-TR AND E-TRx, Step, E-TRx ONLY

INSTALLING YOUR PVS ON THE E-TR AND E-TRx

STEP 1.

Using a #2 Phillips screwdriver, remove the (8) screws from the upper back of the display. Place the cover somewhere safe to keep it from being damaged. Next, remove the (6) screws from the lower back of the display. Place the cover with the other one. Retain all the screws for later use.

STEP 2.

Now remove the upper cap cover that has the STAR TRAC logo on it. This cap is held in by the upper back cover.

You will no longer need this cap cover and, if de- sired, you can store it away for any possible future use.

STEP 3. (E-TRx ONLY)

Note: If you have an E-TR skip this step.

Using a #2 Phillips screwdriver, remove the screw that holds in the blank headphone jack cap at the lower front of the Hot Bar. Retain the screw.

You will no longer need the cap and, if desired, you can store it away for any possible future use.

Now take the headphone jack from the iPod®

CChardware kit. Connect the headphone jack to the cable in the jack opening. Use the previ- ously retained screw to reinstall the headphone jack. Tighten snugly.

Skip ahead to Step 5.

19 620-7991 Rev 002