;ROTATION OF MOTORS: The correct rotating direction for the machine motor is clearly marked on the machine. Always check for proper rotation of motors. Incorrect rotation direction can cause severe damage.
;ELECTRICAL GROUNDING: All electrical equipment on the granulator must be grounded in accordance to all local codes and Article 250 of the National Electric Code.
;ALWAYS DISCONNECT AND LOCKOUT the main electrical power to the granulator before performing any service.
;SAFETY INTERLOCKS MUST NOT BE BYPASSED. The mechanical and electrical safety interlocks ensure the safety of personnel. They should never be tampered with or removed for ANY reason. They should be checked frequently by a qualified mechanic for proper operation.
;NEVER modify the machine configuration or any individual component without written notice from the factory.
Remaining Risks
The machine is constructed so that you are able to operate it safely. Structurally non- avoidable dangers are prevented as well as possible by the protective devices. Certain risks still remain. It is imperative to be aware of these risks in order to avoid accidents. To avoid danger, please observe all safety advice provided.
Type of Danger | Activity | Possible | Preventative Measures | |
|
| Consequences |
| |
|
|
|
| |
Danger of crushing by | Unloading and | Serious injury | • Wear personal protective gear | |
heavy parts falling | transporting the |
| • Follow safety instructions in | |
down/over | machine and/or |
| ||
| manual | |||
| components |
| ||
|
|
| ||
|
|
|
| |
Cutting caused by | Knife replacement, | Serious injury | • Wear personal protective gear | |
sharp | knife setting, knife | particularly to hands | • Follow safety instructions in | |
when rotor is | sharpening and other | and fingers | ||
manual | ||||
stationary | maintenance work |
| ||
|
| |||
|
|
|
| |
Crushing when | Maintenance work | Serious injury | • Make sure no persons are in the | |
opening/closing |
|
| danger area while closing the door | |
maintenance doors on |
|
|
| |
front side of machine |
|
|
| |
|
|
|
| |
Tripping over cables | All activities | Serious injury | • Lay cables in accordance with | |
and other objects |
|
| regulations. | |
|
|
| • Keep work station clean and tidy. | |
|
|
|
| |
Crushing, cutting, | Maintenance work | Serious injury or death | • Maintenance doors must always | |
amputation caused by |
|
| be tightly locked during operation. | |
run down of the rotor |
|
| • DO NOT make the run down | |
|
|
| ||
|
|
| safety devices ineffective by using | |
|
|
| technical aids or other | |
|
|
| manipulations. | |
|
|
| • NEVER use hands to check if the | |
|
|
| rotor has stopped. | |
|
|
|
| |
Chapter 1: Safety | 8 of 73 | |||
