![](/images/new-backgrounds/1315701/31570163x1.webp)
English
Chain Lubricant
001BA241 KN
Filler cap is now closed.
If the filler cap will not engage into the tank housing
The base of the filler cap is rotated in relation to the upper part.
NLook at the black alignment marks on the top of the filler cap.
| 1 |
| 001BA238KN |
Left: | Base of filler cap is rotated – |
| interior marking (1) is aligned |
| with the exterior marking. |
Right: | Base of filler cap is in the cor- |
| rect position – interior |
| marking is below the clip. It |
| does not align with the exte- |
| rior marking. |
001BA239 KN
NWith the filler cap in the filling neck, twist it counterclockwise until it drops into its seat.
NContinue to twist the filler cap counterclockwise (approx. 1/4 turn)
– this will twist the base of the cap into the correct position.
NWhile pushing down on the cap, twist the filler cap clockwise and close it – see section "Closing."
For automatic and reliable lubrication of the chain and guide bar – use only an environmentally compatible quality chain and bar lubricant. Rapidly biodegradable STIHL BioPlus is recommended.
NOTICE
Biological chain oil must be resistant to aging (e.g. STIHL BioPlus), since it will otherwise quickly turn to resin. This results in hard deposits that are difficult to remove, especially in the area of the chain drive and chain. It may even cause the oil pump to seize.
The service life of the chain and guide bar depends on the quality of the lubricant. It is therefore essential to use only a specially formulated chain lubricant.
WARNING
Do not use waste oil. Renewed contact with waste oil can cause skin cancer. Moreover, waste oil is environmentally harmful.
NOTICE
Waste oil does not have the necessary lubricating properties and is unsuitable for chain lubrication.
30 | MS 241 |