STIHL MS 241 C-M manual Oil Quantity Control, Long-term storage

English

Long-term storage

See "Storing the machine"

Oil Quantity Control Taking Care of the Guide Bar

Varying cutting lengths, types of wood and work techniques require varying amounts of oil.

1	KN
	001BA157

The oil flow can be adjusted as needed using the adjusting screw (1) (on the bottom of the machine).

Ematic position (E), medium oil flow –

NTurn adjusting screw to E (Ematic position)

To increase oil flow –

Nturn the adjusting screw clockwise To reduce oil flow –

Nturn the adjusting screw counterclockwise

NOTICE

The saw chain must always be coated with oil.

	2
		KN
1	3	143BA026

NTurn the guide bar over – every time you sharpen the chain and every time you replace the chain – this helps avoid one-sided wear, especially at the nose and underside of the bar.

NRegularly clean the oil inlet hole (1), the oilway (2) and the bar groove

(3).

NMeasure the groove depth – with the scale on the filing gauge (special accessory) – in the area used most for cutting.

38 MS 241 C-M