English
Chain scabbard
001BA244 KN
Your saw comes standard with a chain scabbard that matches the cutting attachment.
If you use guide bars of different lengths on the saw, the length of the chain scabbard must be matched to the guide bar to reduce the risk of injury. It should
Mounting the Bar and Chain
Removing the chain sprocket cover
533BA001 KN
NUnscrew the nut and remove the chain sprocket cover.
Disengage the chain brake.
001BA186 KN
NPull the hand guard towards the front handle until there is an audible click – the chain brake is disengaged.
Fitting the chain
cover the full length of the guide bar.
The length of the matching guide bars is marked on the side of the chain scabbard.
| 1 |
2 | KN |
| 001BA185 |
NTurn the screw (1) counterclockwise until the tensioner slide (2) butts against the left end of the housing slot.
143BA003 KN
WARNING
Wear work gloves to protect your hands from the sharp cutters.
NFit the chain – start at the bar nose.
26 | MS 241 |
