Configuration for Win XP
To Access to Certain Wireless Network Type
The default network type of Windows XP Zero Configuration is any available access points (Access Point mode) or WLAN Card equipped computers (Ad-Hoc mode) within the range at the given time. However, you may wish to connect to a certain network type sometimes. To change the default settings, click the Advanced button in the
Wireless Network Connection Properties dialog box.
The Advanced dialog box provides three options, Any available network, Access point networks only, and Computer-to- computer networks only. Choose one of them according to your need and click Close to finish. Then you will find under the Available networks area in the Wireless Network Connection Properties dialog box, only the specified networks are displayed.
Note: If you wish to use the attached application – Wireless-G Configuration Tool of the Wireless-G USB 2.0 Flex Adaptor instead of Windows XP’s Wireless Zero Configuration, please refer to Installation Notes –Windows XP in this manual to
change the settings. (Page 13)
