Stoelting 4231G, 4231H 3.12 ROUTINE CLEANING, NOTE, Do not, Figure 30. Drain Trays, Figure 29. Installing Mix Inlet Regulators

Figure 29. Installing Mix Inlet Regulators

NOTE

Refer to Section 3.3 for sanitizing the assembled freezer before filling with mix.

L. Install the drain trays (Fig. 30).

CAUTION

DRAIN TRAYS MUST BE IN PLACE BEFORE OPERATING FREEZER TO PREVENT DAMAGE FROM POSSIBLE AUGER SEAL LEAKS.

Figure 30. Drain Trays

3.12 ROUTINE CLEANING

To remove spilled or dried mix for the freezer exterior, simply wash in the direction of the finish with warm soapy water and wipe dry. Do not use highly abrasive materials, as they will mar the finish.

16