Low overrun | 1. | Mix inlet regulator (carburetor) missing. |
| 2. | Mix inlet regulator (carburetor) “O” Ring |
|
| missing. |
| 3. | Mix inlet regulator (carburetor) air tube |
|
| blocked. |
1.Replace mix inlet regulator (carburetor).
2.Replace mix inlet regulator (carburetor) “O” Ring.
3.Clean with sanitizer brush.
Front door leaks. | 1. | Front door knobs are loose. | 1. | Tighten knobs. |
| 2. | Spigot parts are not lubricated. | 2. | See paragraph 3.11. |
| 3. | Chipped or worn spigot “O” Rings. | 3. | Replace “O” Rings. |
| 4. | “O” Rings or spigot installed wrong. | 4. | Remove spigot and check “O” Rings. |
| 5. | Spigot hole in front door nicked or | 5. | Replace front door. |
|
| scratched. |
|
|
Hopper will not | 1. EPR valve needs to be adjusted. | 1. | (See note 1.) | |
Maintain mix | 2. | Temperature control failure. | 2. | Replace. (See notes 1 or 2.) |
temperature below | 3. | Refrigeration problem. | 3. | Check system. (See note 1.) |
45°F (7°C). |
|
|
|
|
1.Must be performed by a qualified service person.
2.The local dealer, distributor or Stoelting, LLC, Service Department should be contacted. Write or call:
Stoelting, LLC 502 Hwy. 67, Kiel, WI 53042
Phone (920)
20