SERVICING INSTRUCTIONS

REPLACING PARTS

d)Remove the external feed pipe from the brass fitting. See diagram 8 arrow B.

e)Remove the 2 screws fixing the valve bracket to the base of the appliance.

f)Gently slide the gas valve and bracket forward and disconnect the thermocouple from the rear of the gas valve. See diagram 9, arrow A.

9

AR0824

g) Push the thermocouple down through the hole in the base of the firebox and remove the component.

3.7When fitting the new component after it has been shaped to the old thermocouple, push the tip (pilot end) through the hole from under the firebox floor. Do not insert the tip into the pilot burner at this stage.

3.8Connect the thermocouple at the gas valve, do not over tighten the nut.

3.9Assemble the gas valve bracket on to the firebox base and all pipes to the valve and fittings.

3.10Insert the tip of the thermocouple into the pilot burner and tighten the nut. Replace the silicone around the thermocouple and ignition lead. Screw the plate into position, replace the pilot cover, log support and replace the ceramics.

4.IGNITION LEAD

4.1Remove the screw from the left-hand side of the control cover. On the right hand side of the cover is a locking tab, this must be gently levered off the main body. Slide the cover forward. See diagram 10.

10

AR0916

4.2Pull the ignition lead off the piezo. Remove the burner as described in section 2, pilot cover and plate as described in section 3.

4.3Disconnect the ignition lead from the electrode and

push the lead complete with the vidaflex through the base of the appliance.

4.4Cut the cable tie and remove the vidaflex sleeve. THIS MUST BE KEPT AND ASSEMBLED ON THE NEW LEAD. A CABLE TIE MUST ALSO BE USED TO RETAIN THE SLEEVE.

4.5The lead can only be fitted one way round, ensure this is correct when refitting a replacement.

4.6When replacing the cover plate ensure silicone sealant is used to seal the aperture.

5.PIEZO

5.1The piezo assembly used on this appliance is not serviceable and is unlikely to fail.

5.2If a new piezo is required it will be necessary to change the gas valve. Refer to section 6.

6.GAS VALVE

6.1Turn the gas supply off at the isolation elbow, and disconnect from the inlet pipe on the fire.

6.2Disconnect the feed pipe and pilot pipe from the brass fittings. See diagram 11.

11

AR0822

23

Page 23
Image 23
Stovax P8627 BS, P8627 MA manual Ignition Lead, Piezo, GAS Valve

8627 MA, P8627 MA, P8627 BS, 8627 BS specifications

Stovax, a renowned name in the fireplace and wood-burning stove industry, has introduced the P8627 series, which includes models P8627 MA and P8627 BS. These products represent a marriage of innovative technology and traditional design, appealing to both modern and classic aesthetics while ensuring high efficiency and performance.

One of the standout features of the P8627 series is its exceptional heat output. These models are engineered to maximize warmth while minimizing fuel consumption, making them an environmentally friendly choice for homeowners. The high-efficiency ratings are complemented by the advanced combustion system that enhances fuel burning, ensuring that more of the wood's energy is converted into heat rather than wasted as smoke.

The P8627 MA model, with its minimalist design and large viewing window, provides an unobstructed view of the fire, creating a warm, inviting ambiance in any living space. It boasts a clean burn technology that significantly reduces emissions, making it an ideal option for eco-conscious consumers. The model's adjustable air control allows users to regulate the burn rate, providing flexibility in how quickly or slowly the fire burns.

On the other hand, the P8627 BS model features a more robust casing, offering added durability while maintaining an elegant appearance. This model also utilizes secondary combustion technology to improve efficiency and reduce particulate emissions. Both models have been tested to comply with stringent environmental standards, ensuring they are safe and efficient for use.

An additional characteristic of the P8627 series is their versatility in installation options. They can be fitted into various settings, whether it be a traditional or contemporary home. With the ability to connect to different flue systems, Stovax ensures that these stoves can accommodate diverse layouts and individual home requirements.

Furthermore, both models are designed with user convenience in mind. The easy-to-use controls, combined with a clean glass design that reduces soot buildup, make maintenance hassle-free. The stylish design options allow homeowners to integrate the stoves seamlessly into their living spaces, enhancing overall aesthetics without compromising functionality.

In summary, the Stovax P8627 MA and P8627 BS models stand out for their efficiency, eco-friendliness, and design versatility. With advanced technologies and user-friendly features, they are an excellent choice for anyone looking to add a reliable and stylish heating solution to their home.