SERVICING INSTRUCTIONS
REPLACING PARTS
1.GENERAL
1.1All principal components can be replaced without removing the appliance from its installation, although it is essential that the gas supply to the appliance is turned off at the isolation device before proceeding further.
1.2If for any reason the flue has to be removed from the appliance, the seal must be replaced in the inner spigot.
2.MAIN BURNER
2.1Open the front door of the appliance and turn the gas supply off at the isolation device, see diagram 1.
1
AR1294
2.2Remove the glass frame see diagram 2.
2
2.3Remove the ceramic logs and the embers.
2.4Carefully slide the ceramic sides forward and store safely. See diagram 3.
3
AR0759
2.5Remove the screws from the log support. The feed pipe nut is now visible between the burner and the angled base of the firebox. See diagram 4, arrow A.
4
AR0818
2.6Undo the feed pipe nut and the four screws holding the burner to the tray. See diagram 4, arrow B. The burner, complete with the feed pipe, can now be removed.
2.7To replace the burner, locate the feed pipe onto the brass fitting and loosely fit the nut. DO NOT TIGHTEN THE NUT AT THIS STAGE. Replace the four burner fixing screws, tighten the feed pipe nut.
2.8Light the appliance and check for leaks.
AR0816
21
