Stow 20HP, 13HP manual Accidental Starting, Respiratory Hazard, Over Speed Conditions

STOW CUTTER 3 CE SAW — SAFETY MESSAGE ALERT SYMBOLS

Accidental Starting

ALWAYS place the ON/OFF switch in the OFF position, remove key and/or disconnect the spark plug lead before servicing the engine or equipment. Ground the lead to prevent sparks that could ignite a fire.

Respiratory Hazard

ALWAYS wear approved respiratory protection.

Over Speed Conditions

NEVER tamper with the factory settings of the engine governor or settings. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable.

Sight and Hearing hazard

ALWAYS wear approved eye and hearing protection.

Guards and Covers In Place

Equipment Damage Messages

NEVER operate the saw without blade guards and covers in place. Adhere to safety guidelines ANSI American National Standards Institute, OSHA or other applicable local regulations.

Other important messages are provided throughout this manual to help prevent damage to your slab saw, other property, or the surrounding environment.

CAUTION

This concret/asphalt saw, other property, or the surrounding environment could be damaged if you do not follow instructions.

WARNING

To avoid injuries and damage to the equipment, ALWAYS read and understand the contents of operation manual before operating equipment.

PAGE 8 — STOW CUTTER 3 CE SAW — PARTS & OPERATION MANUAL — REV. #5 (09/22/06)