SAFETY PRECAUTIONS

OPERATION.

1)Give complete and undivided attention to the job at hand. Do not chew gum, smoke and/or use smokeless tobacco while utilizing the Crack Saw. Do not attempt to eat and/or drink while utilizing the Crack Saw. Determine that eyeglasses and/or hearing aid devices are properly secured

Use of the Crack Saw is strenuous and causes fatigue. Help prevent the cause of an accident. Plan to take work breaks as required to help maintain proper mental and physical alertness.

2)This CRACK SAW is not sealed or insulated. Do not operate the CRACK SAW in an explosive atmosphere or near combustible materials. Refer to current OSHA® rules and regulations.

3)Gasoline is an extremely flammable fuel. Use extreme caution when handling gasoline or mixing fuel. Always utilize UL®, CSA® OR CE approved containers for the storage and transportation of fuel. Do not smoke or bring fire or flame near the fuel. Always shut off the engine and allow it to cool before refueling. Never remove the fuel tank filler cap while the engine is running. Never operate an engine without a fuel tank filler cap. Select bare ground for fueling and move at least 10 feet from the fueling spot before starting the engine. Wipe off any spilled fuel before starting the engine and check for leakage. If a fuel or oil leak is found, do not start or run the engine until the leak is fixed and the spillage has been wiped away. Take care not to get fuel or oil on your clothing. If this happens, change your clothing immediately. Before operating the Crack Saw refer to the Specifications section of this manual for more detailed information regarding fuel and lubrication requirements.

4)The Crack Saw is designed for use by one operator. Use of the Crack Saw by more than one operator can lead to confusion and loss of control, resulting in property damage and/or personal injury. If it is felt that more than one person is required to operate the Crack Saw, STOP and contact the Customer Service Department for specific operational and service/maintenance information. There is no charge for this service.

5)Do not operate the Crack Saw with onlookers close by. Caution all onlookers to stand clear. The sawing process can result in flying particles being emitted at high velocity and striking the operator and/or onlookers. This can lead to the possibility of property damage and/or personal injury. Keep all body parts, loose clothing and foreign objects clear of the rotating diamond blade.

6)Start the engine or electric motor according to the instructions as outlined in this manual to minimize the possibility of unexpected contact with the work surface. Unexpected contact with the work surface can cause the loss of machine control and the possibility of property damage and/or personal injury.

7)Start and operate the Crack Saw only in a well ventilated area. Carbon Monoxide fumes given off by an engine are poisonous. Breathing these fumes can result in property damage and/or personal injury. Operate the Crack Saw only when/where visibility and light are adequate for the job at hand. Work carefully. Always hold the operator handle firmly with both hands. Wrap your fingers around the handle, keeping it cradled between your thumbs and fingers. Always make sure the operator handle is in good condition and free of moisture, pitch, oil or grease. Wear gloves to improve your grip. Never leave the Crack Saw running unattended.

8)Special care must be exercised on slippery conditions and on difficult, uneven surfaces. Watch for cracks, high spots and other, surface irregularities. Keep proper footing and balance at all times. The normal use of this machine is on level surfaces. Other terrains can be dangerous and should be avoided. Only properly trained operators should attempt these techniques.

9)Never start the engine or electric motor with the Crack Saw directly over cracked, uneven or irregular surfaces. Start the engine or electric motor according to the instructions as outlined in this manual.

10)Contact with a hot, engine muffler can cause property damage and/or personal injury. Remain clear of a hot, engine muffler. Do not over speed the engine by altering the governor setting or by disconnecting the engine governor. Serious damage to the engine and/or personal injury can result.

11)Clean and remove all accumulated foreign matter from inside the main frame area after each use. This practice will maximize bearing and V-belt service life.

12)Because this Crack Saw is classified as a low cost, hand held, low horsepower, portable type machine, it is limited in the number of practical and/or suitable job applications. A particular job site, actual surface conditions, job specifications and operator skill/common sense may dictate that a different type of machine (with characteristics of higher purchase cost, being mounted to a carrier

RCC130H-CRACK SAW

OPERATION AND PARTS MANUAL REV #1 (11/18/04)

PAGE 12

 

 

 

Page 11 Page 13
Page 12
Image 12
Stow RCC130H manual Operation
Page 11 Page 13

RCC130H specifications

The Stow RCC130H is an advanced compact ride-on compactor designed for efficient and powerful performance in various construction and road maintenance projects. Known for its reliability and versatility, the RCC130H is a popular choice among contractors and operators seeking optimal results in soil and asphalt compaction.

One of the key features of the RCC130H is its robust engine. Equipped with a high-performance diesel engine, the compactor provides excellent power and torque, enabling effective operation even in challenging terrains. The engine is designed for fuel efficiency, ensuring lower operational costs while delivering superior compaction force. The machine's hydraulic system is equally impressive, allowing smooth operation of the vibratory system that enhances productivity by increasing compaction density in less time.

User comfort is another priority in the design of the RCC130H. It features an ergonomic control layout that allows operators to easily reach all necessary functions, reducing fatigue during long hours of operation. The operator's platform is spacious and designed with optimal visibility in mind, enhancing safety and control when navigating through job sites.

The RCC130H showcases advanced compaction technologies, including dual amplitude settings. This feature lets operators choose between different settings depending on the material being compacted—whether it’s granular soils, cohesive materials, or asphalt. The machine’s heavy-duty drum is specially designed to maximize contact with the surface, ensuring uniform compaction results.

Durability is also a hallmark of the Stow RCC130H. Constructed with high-quality materials and components, the machine is built to withstand the rigors of demanding work environments. Its frame design offers stability and reduces the impact of vibrations on the operator, which enhances long-term comfort and control.

Maintenance is made simple with the RCC130H, featuring easy access points for routine checks and servicing. The design minimizes downtime, ensuring that the machine stays operational and productive on the job.

In summary, the Stow RCC130H is a feature-rich compact ride-on compactor designed for maximum efficiency and performance. With its powerful engine, ergonomic design, advanced compaction technology, and durable construction, the RCC130H is an excellent investment for those looking to enhance their compaction operations on various job sites.
Top Page Image Contents