Stow RCC130H manual Danger, Assembly Instructions/Operations

ASSEMBLY INSTRUCTIONS/OPERATIONS

of the work surface when deployed to its maximum up position. FIGURE 28.

FIGURE 27

FIGURE 28

The quick-change height lever is intended to provide a fast method to raise the blade for the following reasons:

a)When the sawing process is completed for a random crack, the blade can be quickly raised from the work surface and the machine moved by the operator to another random crack on the job site. Lowering the quick change lever to the full down position will return the diamond blade to the specific depth as originally determined by the height adjustment lever.

FIGURE 29. The quick change height lever is intended to produce uniform sawing depths for any specific job application.

FIGURE 29

DANGER

EXERCISE EXTREME CAUTION WHEN MOVING THE CRACK SAW ON THE JOB SITE WITH THE POWER SOURCE RUNNING AND THE QUICK CHANGE HEIGHT LEVER OVER CENTER TO ITS REAR MOST (UP) POSITION. IN THIS OPERATING CONFIGURATION, THE DIAMOND BLADE CAN COME IN DIRECT CONTACT WITH FOREIGN OBJECTS AND THE WORK SURFACE

ITSELF. THIS OCCURRENCE CAN SUBSTANTIALLY REDUCE MACHINE CONTROL AND PRODUCE FLYING OBJECTS, RESULTING IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. CAUTION ALL ONLOOKERS REGARDING THE POSSIBILITY OF FLYING OBJECTS.

b)If the sawing process overloads the power source to cause complete stoppage, the diamond blade can be readily raised by the operator to clear the work surface before the power source is restarted.

DANGER

DO NOT START AND/OR RESTART THE POWER SOURCE WITH THE DIAMOND BLADE IN DIRECT CONTACT WITH THE WORK SURFACE. BEFORE STARTING AND/OR RESTARTING THE POWER SOURCE, RAISE THE QUICK CHANGE HEIGHT LEVER OVER CENTER TO ITS REAR MOST (UP) POSITION TO ALLOW THE DIAMOND BLADE TO COMPLETELY CLEAR THE WORK SURFACE. IF THIS ACTION DOES NOT COMPLETELY RAISE THE DIAMOND BLADE FROM THE WORK SURFACE, DETERMINE THAT

RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 26