ASSEMBLY INSTRUCTIONS/OPERATIONS

DANGER

IMPROPER USE OF A DIAMOND BLADE WITH THE CRACK SAW CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY.

DANGER

PROPER OPERATIONAL USE OF A DIAMOND BLADE THAT DOES NOT MEET INDUSTRY

SPECIFICATIONS AND/OR SAFETY STANDARDS WITH THE CRACK SAW CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY.

General Information.

1)" Only mature, properly instructed adults should be permitted to operate machinery and tools.

2)Only utilize the blade to cut the material it is designed and intended to cut. Blades intended for masonry material (stone, concrete bricks, blocks) or blades for steel or ductile iron must only be used in those materials. If you need to cut a material other than the ones listed above, you must use a blade that has been designed for that specific material. Use of a blade in the wrong material may involve a considerable safety risk. It may also reduce the life of the blade or damage the blade.

3)Inspect all diamond blades for damage before use.

4)Never use a new or used diamond blade that shows damage such as cracks, missing segments, damage to the arbor hole or by the flange washers, or other appearances not consistent with the appearance of a new blade. These are indications of previous improper use. If you have any doubt about the safety of a blade, contact the Customer Service Department of the blade manufacturer for assistance. If you do not know the name of the blade manufacturer, contact the Customer Service Department of General Equipment Company for assistance. There is no charge for this service.

5)Always check that the two mounting flanges are of the same diameter and that they are clean and flat. The flanges should not have any cracks or show any abnormal wear. Make sure that the arbor bolt or nut is the correct one for the equipment without damage to the threads. Improper or damaged flange washers and/or damaged fasteners can damage the

blade or cause the blade to come loose from its mount. A blade that comes loose can cause serious bodily injury or death to the operator or bystander. If there are any questions regarding the suitability of a specific mounting flange, contact the Customer Service Department for assistance BEFORE utilizing the diamond blade. There is no charge for this service.

6)Always make sure that the arbor hole in the blade matches the one on the equipment. Do not force the blade onto the spindle. Do not use an arbor shaft (spindle) and blade combination of different sizes. Proper fit is achieved when the blade slides onto the arbor without having more than 0.1 mm (0.005 inch) radial play.

7)Always tighten the bolt or nut for the flange washers in accordance with the equipment manufacturer's specifications.

8)Always make sure that the equipment used is in good operating condition in accordance with the manufacturer's specifications. Do not operate the equipment unless the guards are in good condition, in the proper place and secure. If the equipment appears to be missing any fasteners or has any parts that appear loose or worn, do not operate the equipment until the appropriate repairs are performed. Always make sure the blade you intend to use with the equipment meets all the equipment manufacturer's specifications.

9)Do not operate the equipment with other than the recommended blade sizes. This can result in severe blade damage. Contact the machine manufacturer for advice.

10)Make sure that the spindle speed on the machine does not exceed the maximum RPM indicated on the diamond blade. This can result in blade breakage. Check the blade shaft with a tachometer to verify that the equipment's maximum RPM does not exceed the manufacturer's specifications.

11)Blades designed for wet cutting must be cooled by an adequate, continuous water flow to each side of the blade. Lack of enough coolant will cause excessive heat, poor blade performance and possible segment loss.

12)Blades designed for dry cutting may be used without water coolant. However, dry cutting blades can overheat which will result in loss of blade tension and may ruin the blade. The risk is greatest during long continuous cutting. Most overheating problems can be avoided by lifting the blade out of

RCC130H-CRACK SAW

OPERATION AND PARTS MANUAL REV #1 (11/18/04)

PAGE 16

 

 

 

Page 15 Page 17
Page 16
Image 16
Stow RCC130H manual General Information
Page 15 Page 17

RCC130H specifications

The Stow RCC130H is an advanced compact ride-on compactor designed for efficient and powerful performance in various construction and road maintenance projects. Known for its reliability and versatility, the RCC130H is a popular choice among contractors and operators seeking optimal results in soil and asphalt compaction.

One of the key features of the RCC130H is its robust engine. Equipped with a high-performance diesel engine, the compactor provides excellent power and torque, enabling effective operation even in challenging terrains. The engine is designed for fuel efficiency, ensuring lower operational costs while delivering superior compaction force. The machine's hydraulic system is equally impressive, allowing smooth operation of the vibratory system that enhances productivity by increasing compaction density in less time.

User comfort is another priority in the design of the RCC130H. It features an ergonomic control layout that allows operators to easily reach all necessary functions, reducing fatigue during long hours of operation. The operator's platform is spacious and designed with optimal visibility in mind, enhancing safety and control when navigating through job sites.

The RCC130H showcases advanced compaction technologies, including dual amplitude settings. This feature lets operators choose between different settings depending on the material being compacted—whether it’s granular soils, cohesive materials, or asphalt. The machine’s heavy-duty drum is specially designed to maximize contact with the surface, ensuring uniform compaction results.

Durability is also a hallmark of the Stow RCC130H. Constructed with high-quality materials and components, the machine is built to withstand the rigors of demanding work environments. Its frame design offers stability and reduces the impact of vibrations on the operator, which enhances long-term comfort and control.

Maintenance is made simple with the RCC130H, featuring easy access points for routine checks and servicing. The design minimizes downtime, ensuring that the machine stays operational and productive on the job.

In summary, the Stow RCC130H is a feature-rich compact ride-on compactor designed for maximum efficiency and performance. With its powerful engine, ergonomic design, advanced compaction technology, and durable construction, the RCC130H is an excellent investment for those looking to enhance their compaction operations on various job sites.
Top Page Image Contents