MAINTENANCE/SERVICE

CAUTION

Wear safety glasses and other appropriate safety apparel when removing the snap ring or performing any work with an arbor press. Caution all onlookers about the possibility of flying debris and personal injury.

14)Rotate the arbor shaft by hand to determine the amount of bearing preloading created as a result of the installation process.

Properly installed replacement bearings should rotate without excessive friction, drag and/or "rough spots". If these symptoms occur after assembly, the bearings were improperly supported when pressed into the bearing block. The resulting thrust placed upon the bearing exceeded the static capacity. Bearing operating with these characteristics will deliver minimal service life and be prone to premature failure.

15)Inspect the hub body drive key and hub body for wear and/or damage. Replace any questionable component with a factory replacement part only. Reinstall the hub body drive key into the arbor shaft. Reinstall the hub body to the arbor shaft until it fully seats against the inside bore of the bearing. Reinstall the two Allen screws into the hub body and properly torque.

16)Inspect the arbor shaft drive key and arbor shaft pulley for wear and/or damage. Replace any questionable component with a factory replacement part only. Reinstall the arbor shaft pulley drive key into the arbor shaft. Reinstall the arbor shaft pulley. Do not torque the Allen screws at this time. The Allen screws will be tightened after determining that the engine/electric motor and arbor shaft pulleys are in proper alignment. See Step 19.

17)Reassemble the bearing block to the main frame. Determine that the arbor shaft rotates perpendicular to both the vertical and horizontal planes as defined by the direction of machine travel.

18)Follow the instructions as outlined for

INSTALLING A REPLACEMENT V-BELT OR PULLEY to complete the assembly of the pulleys, V- belts and belt guard.

19)Reconnect the engine spark plug wire .

DANGER

UNEXPECTED MACHINE START UP CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY.

LUBRICATION REQUIREMENTS.

Application: All Models.

Parts Required:

1 each, standard grease gun filled with one of the following: ESSO Beacon 325, Shell Alvania #2, Chevron SRI, or equivalent.

1 each, container of dry film lubricant.

1)Lubricate the rigid caster wheel bearing with a dry film lubricant only. Dry film lubricants dry immediately upon contact. Use sparingly. Excess lubricant will attract the fine grained, powdered materials described in this manual and directly affect bearing service life.

CAUTION

Do not lubricate the rigid caster wheels with any type of grease material. Grease will attract foreign material accumulations that can accelerate bearing wear.

2)The arbor shaft is supported by extra capacity, ball bearings. These bearings are lubricated at the time of manufacture and do not require additional servicing when placing the unit in initial service or during their normal service life. During the first few hours of service, lubrication material may seep from the bearings. This should not be a cause for immediate concern.

3)The swivel wheel casters are sealed to minimize the potential for dust contamination. Lubricate the swivel caster wheels with the grease gun. Use sparingly. Excess lubricant will attract the fine grained, powered materials described in this manual and directly affect bearing service life.

4)Do not apply belt dressing materials to the V-belts for the purpose of minimizing slippage. These products typically attract foreign material accumulations that can accelerate component wear. Excessive V-belt slippage can be eliminated with proper V-belt tension and alignment.

RCC130H-CRACK SAW

OPERATION AND PARTS MANUAL REV #1 (11/18/04)

PAGE 37

 

 

 

Page 36 Page 38
Page 37
Image 37
Stow RCC130H manual Application All Models
Page 36 Page 38

RCC130H specifications

The Stow RCC130H is an advanced compact ride-on compactor designed for efficient and powerful performance in various construction and road maintenance projects. Known for its reliability and versatility, the RCC130H is a popular choice among contractors and operators seeking optimal results in soil and asphalt compaction.

One of the key features of the RCC130H is its robust engine. Equipped with a high-performance diesel engine, the compactor provides excellent power and torque, enabling effective operation even in challenging terrains. The engine is designed for fuel efficiency, ensuring lower operational costs while delivering superior compaction force. The machine's hydraulic system is equally impressive, allowing smooth operation of the vibratory system that enhances productivity by increasing compaction density in less time.

User comfort is another priority in the design of the RCC130H. It features an ergonomic control layout that allows operators to easily reach all necessary functions, reducing fatigue during long hours of operation. The operator's platform is spacious and designed with optimal visibility in mind, enhancing safety and control when navigating through job sites.

The RCC130H showcases advanced compaction technologies, including dual amplitude settings. This feature lets operators choose between different settings depending on the material being compacted—whether it’s granular soils, cohesive materials, or asphalt. The machine’s heavy-duty drum is specially designed to maximize contact with the surface, ensuring uniform compaction results.

Durability is also a hallmark of the Stow RCC130H. Constructed with high-quality materials and components, the machine is built to withstand the rigors of demanding work environments. Its frame design offers stability and reduces the impact of vibrations on the operator, which enhances long-term comfort and control.

Maintenance is made simple with the RCC130H, featuring easy access points for routine checks and servicing. The design minimizes downtime, ensuring that the machine stays operational and productive on the job.

In summary, the Stow RCC130H is a feature-rich compact ride-on compactor designed for maximum efficiency and performance. With its powerful engine, ergonomic design, advanced compaction technology, and durable construction, the RCC130H is an excellent investment for those looking to enhance their compaction operations on various job sites.
Top Page Image Contents