E6581429
5.1Displaying details of an item monitored
1.Select/confirm the desired item using the control dial.
(Ex. Select/confirm “Output current”)
The monitor window of the item selected appears.
*Depending on the item selected, no monitor window may be displayed.
Functions of function keys
F1 : Goes to the Top View Mode.
F4 : Goes to the Parameter Setup Mode.
QHow to use monitor windows
Monitor windows can be broadly classified under the following three types
<Type of window 1: Displays a value and a graph>
This type of window displays an analog value, such as an output frequency, output current or output voltage.
(Ex. “Output current”)
5 It displays the current value in both of numerical form and graph form.
In addition, the minimum allowable value (min) and the maximum allowable value (max) are also displayed at the bottom of the window.
<Type of window 2: Displays information in a graph form>
This type of window displays input/output terminal information and parts replacement alarm.
(Ex. “Input terminal : S4, S3...R, F”)
It displays the ON/OFF status of each terminal signal or alarm signal in a graph form.
If the arrow 
is moved to a terminal or alarm symbol, the name of the function assigned to the terminal or the name of the alarm is displayed.
<Type of window 3: Displays information in a list form>
This type of window displays detailed past trip information. (Ex. Past trip # 1 (latest))
It displays the conditions under which the inverter was operated at the occurrence of tripping.
Status Monitor Mode
Output current
22%
min=0 | max=185 |
Top | Prm |
Status Monitor Mode
Output current
22%
min=0 | max=185 |
Top | Prm |
Status Monitor Mode
Input terminal 1 : S4,S3…R,F
S4 S3 S2 S1 RES ST R F
ON
OFF
Forward run
TopPrm
Past trip # 1 (latest)
| E | :Emergency stop |
|
|
|
| Sequence number | 1 |
| ||
| Output frequency | 25.0Hz | |||
| Rotative direction | FWD | |||
| Frequency reference | 30.0Hz | |||
| Output current | 40% |
| ||
Top | Prm |
