STUDER Innotec | ||||
|
|
|
| |
| 4.8.3 Delayed mode of the Transfer System | 15 | ||
| 4.9 | THE SOLAR CHARGE CONTROLLER (OPTION) | 15 | |
| 4.10 | THE MULTIFUNCTIONAL CONTACT | 16 | |
| 4.11 | THE TEMPERATURE SENSOR | 16 | |
5 | The Remote Control | 16 | ||
| 5.1 | REMOTE CONTROL | 16 | |
| 5.2 | POWER MONITOR | 16 | |
| 5.3 | BATTERY CONDITION: | 17 | |
| 5.4 | FAULT INDICATOR | 17 | |
| 5.4.1 | Overtemp. (10) | 17 | |
| 5.4.2 | Overload (11) | 17 | |
| 5.4.3 | Battery low/high | 17 | |
| 5.5 | DEPORTED ALARM CONTACT AND ON/OFF CONTROL | 17 | |
| 5.6 | MANUAL CONTROL OF THE AUXILIARY CONTACT | 17 | |
6 | Programming | 17 | ||
| 6.1 | STANDARD SETTING | 18 | |
| 6.1.1 | Battery voltage | 18 | |
| 6.1.2 | Auxiliary contact | 18 | |
| 6.2 | RESET VALUE | 18 | |
| 6.3 | BATTERY VOLTAGES AND ABSORPTION TIME: | 18 | |
| 6.3.1 Table of voltage and timing threshold | 18 | ||
| 6.3.2 Set the voltage and timing threshold | 18 | ||
| 6.4 | PROGRAM THE AUXILIARY CONTACT | 19 | |
| 6.4.1 | Principle | 19 | |
| 6.4.2 The programming of the Auxiliary Contact is carried out in the following Steps | 19 | ||
| 6.4.3 | Example | 20 | |
| 6.5 | DISABLING SOME OF THE | 20 | |
| 6.5.1 Diagram of the different mode | 20 | ||
7 | Maintenance | 21 | ||
8 | CE Compliance | 21 | ||
9 | Technical Data | 22 | ||
User manual |
| 2 |
