Studer Innotec XPC 2200-48 The Remote Control, The Multifunctional Contact, Power monitor

STUDER Innotec XP-COMPACT

4.10 The Multifunctional Contact

In the XP-COMPACT there is a built-in power relay. The potential-free change-over contact (NO – NC) of this power relay is connected to the screw terminal AUX CONTACT.

Maximum Contact load: 230Vac /12Vdc/24Vdc/16Amp 60Vdc/3 Amp. !

The contact is activated when the XP-COMPACT is halted or by a fault condition, or by a normal manual stop done by pushing push-button 19.

This auxiliary contact can be freely programmed for any displayed functional status through the remote control (refer to chap.5)

4.11 The Temperature sensor

Operating voltage of lead-acid batteries change depending on the tempera- ture. To correct the operating voltages according to the actual temperatures, a temperature sensor can be connected to the COMPACT.

The compensation through the sensor is –3mV/°C/Cell.

Order Number: CT-35

Dimensions: H x B x T / 58 x 51.5 x 22mm

5 The Remote Control

As an option a Remote Control can be connected to the XP- COMPACT through a standard supplied 20m long cable. It can be extended to 40m.

The Remote Control is suitable for surface mounting on the wall or on to a switch board. It is fixed with 4 screws.

All operating controls and displays except from level adjustment are available on the Remote Control. Several extra features are implemented in the remote control:

A charging current monitor (25) Output power monitor (25) The battery status monitor Auxiliary contact programming Battery voltage level adjustment Remote Alarm contact and command

5.1Remote control plug-in

The remote is delivered with a 20m long cable and can be connected or discon- nected at any time while the main unit is running (hot plug).

The remote control can be mounted with the frame or directly on a board. The screws are not supplied.

5.2Power monitor

The instantaneous power of the inverter in % off Pnom or the charging current is continuously displayed on LED lines (25).

INVERTER - CHARGER				COMPACT
1		TRANSFER	8		A	%
AC IN				AC OUT	100	160
	2	7	9		90	160
CHARGER				INVERTER	80	130
				RESET	70	100
SOLAR CHARGE			20		60	80
				ALARM
3
				(Select)	50	60
EQUALIZE	14		10	Over Temp.	40	40
					30	20
4 Program		15	11	Overload	20	10
			12	Battery	10	5
5 Contact active		16		Low/High	Charger	Inverter
6 Contact manual		17	13	OFF
		18				25
AUXILIARY CONTACT				ON/OFF
(Program)				(Change status)
21			19

RCC-01

User manual XP-COMPACT V5.1 E 16