S A F E T Y INSTRUCTIONS AND PRECAUTIONS
IMPORTANT NOTE: Read all safety instructions before using this appliance.
Read this Use & Care Information carefully before using your new downdraft ventilation system to
reduce the risk of fire, electric shock or injury to persons.
Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and standards, including
Use this downdraft only in the manner intended.
Before servicing or cleaning, switch power off at the service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means can not be locked, securely fasten a promi- nent warning device, such as a tag, to the service panel.
Sufficient air is needed for proper combustion and exhausting of gases
through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equip- ment manufacturer’s guideline and safety standards.
This appliance must be grounded.
For general ventilating use only. Do
not use to exhaust hazardous or explosive materials and vapors.
Ducted fans must always be vented to the outdoors.
To reduce the risk of fire, use only steel ductwork.
Do not install this downdraft with the activating switch directly behind a burner or element. The minimum distance between the switch and edge of the burner should be
102 mm.
Do not wear
clothing when operating this appli- ance. It may be ignited by burners or elements on the cooktop.
Children should not be left alone or
unattended in the area where this appliance is in use.
To reduce the risk of fire and properly exhaust air, be certain to duct air outside. Do not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces or garages.
6
