13-6 UltraEnterprise 6000/5000/4000 Systems Manual—November 1996
13
13.3.5 Rear Screen Panel
Toremove the rear screen panel:
1. Remove the two #10 Phillips screws securing the panel to the frame.
See Figure 13-3.
2. Tilt the panel top out and lift it free of the chassis. Set the panel aside.
There is a flange on the bottom of the rear screen.
Figure13-3 Removing the Rear Screen Panel
Note – If your cabinet has a hinged rear door,remove the pins from the hinges
and lift the door free of the chassis. Reverse this procedure toreplace the door.
Toreplace the rear screen panel:
1. Insert the panel so the bottom flange engages behind the top of the kick
panel.
2. Tilt the panel flush against the frame and secure using Phillips screws.
#10 Phillips screws
Kick panel