D-1
Rulesfor SystemConfiguration D
Some of the following rules are suggestions for optimizing your system. Other
rules are strictly requiredand are marked with the notation: (Requirement) or
(Maximum).

D.1 Card Cage

As a general rule, all board slots in the card cage are interchangeable.
However,the requirements and limitations in the following sections apply
when you install boards.

D.1.1 CPU/Memory Boards

1. Install CPU/Memory boards at the front of the system, starting with the top
slot (slot 0). If you reserve the rear slots for I/O boards, I/O cable
attachments will be made easier.
2. After the front slots are filled, you may add CPU/Memory boards at the
rear of the system, below the I/O boards.

D.1.2 I/O Boards

1. An I/O board must always be in slot 1. This is the only slot that allows
access internally to the internal SCSI devices (tape and CD-ROM drives.)
(Requirement)