CPU/MemoryBoards and Components 3-5
3
The hot-plug feature enables you to insert a new board into a powered on
system, despite the system being “live,” or being supplied with electrical
power.When the hot-plug feature is used to add a board to a powered on
system, the system will not use the new board until the system is rebooted.
3.4 CPU/Memory Boards
Each CPU/Memory board supports up to two UltraSPARCmodules and 16
SIMM slots for memory.
Figure3-3 is a simplified block diagram of the CPU/Memory board. It includes
an Address Controller,8 bit-sliced Data Controllers, a Bootbus Controller, on-
board devices (including a Flash PROM, and SRAM), two CPU processorslots,
and slots for two memory banks of 8 SIMMs each.