CPU/MemoryBoards and Components 3-21
3
4. Eject the faulty SIMM by pressing down on the ejection levers on both
sides of the SIMM connector.
See Figure 3-14.
Figure3-14 Ejecting a SIMM
5. Holding the SIMM by its edges, remove it from the slot and place it on an
antistatic surface.
3.4.5.2 Installing a Memory Module

Requirements

All banks must have the same size SIMMs, however,SIMMs from different
manufactures are interchangeable in a single bank if the SIMMs all have the
same capacity and speed. Sort the SIMMs into banks of 8 using the same size
SIMMs.