2.2Upgrading the BIOS on B200x Server Blades
To run Red Hat Enterprise Linux version 3.0 or SuSE Linux Enterprise Server 8, service pack 3 on a B200x server blade, the blade must have BIOS version 1.1.32 installed. This version of the BIOS is available from the following website:
http://wwws.sun.com/software/download/network.html
You can upgrade the BIOS on the blade using the biosupdate utility. This utility loads a device driver called mtdbios, performs the BIOS update using the slflash utility, and then unloads the mtdbios driver.
The biosupdate utility is installed on the server blade as part of the PXE boot installation process. For information on the PXE boot installation, see Chapter 4 of the Sun Fire B100x and B200x Server Blade Installation and Setup Guide (available on the CD supplied with the blade).
Caution – When upgrading the BIOS, do not interrupt the process by resetting or powering down the blade. Interrupting the upgrade will permanently damage the blade.
Note – If the BIOS upgrade fails, a failure message is displayed on the screen and in /var/log/messages. If this problem occurs do not reset or power off the blade. Contact your Sun Beta support manager for advise.
2.2.1To Upgrade the BIOS
1.Log into the blade for which you want to update the BIOS. At the SC prompt, type:
sc> console sn
where n is the number of the slot containing the blade.
Chapter 2 Linux
