ASSEMBLING YOUR BLENDER
CAUTION: Follow these important steps to assemble, tighten, and mount Blender jar quickly and correctly. INJURY MAY RESULT IF MOVING BLADES ARE EXPOSED.
1. | 2. | 3. | 4. |
1.Turn jar upside down so the small opening is at the top.
2.Place sealing ring on jar opening.
3.Turn the blade blades upside down and place in mouth of jar.
4.Thread jar bottom to jar.
TIGHTENING THE JAR
A B
Left | Right |
Stop | Stop |
Jar
Lug
Motor
Base
C D
A. To tighten jar bottom, put assembled jar securely into motor base ring with handle and lug in front of the right stop.
B. Using jar handle, turn jar to the left as far as possible. This insures that the jar bottom is tightened properly. Remove jar from motor base and mount.
C. To operate Blender, place assembled jar in motor base ring with jar lug against flat side of the motor base stop. If jar lug does not rest against flat side of right stop, remove jar assembly and place against flat side of left stop. Seat jar firmly and operate.
D. To remove jar, lift straight up. (If it is not easily removed, rock gently and lift up, do not twist). If jar bottom cannot be loosened by hand, place assembled jar into motor base ring with handle in front of left side stop. Using handle, turn jar to right until jar bottom loosens.
Do not attempt to place the jar on or attempt to remove it from the motor base while the motor is running.
Always Hold Jar with One Hand While Processing!
E N G L I S H - 5
