![](/images/new-backgrounds/1186982/186982121x1.webp)
Chapter 6: Advanced Chassis Setup
6-3 System Fans
Two
System Fan Failure
If a fan fails, the ambient air temperature in the chassis will rise and activate the overheat LED on the control panel. Replace any failed fan immediately with the same type and model.
Replacing System Fans
1. Removing a fan
Power down the server (and remove the power cord as a safety precaution). Remove the chassis cover and detach the fan wires from their connection to the serverboard. Remove the screws that secure the fan to the chassis and lift the blower fan out.
2. Installing a new fan
Replace the failed fan with an identical