C-6
SuperWorkstation 7045A-C3/7045A-CT User's Manual
Creating a RAID 10 (RAID 1+ RAID 0):
a. Select "Create RAID Volume" from the main menu and press the <Enter> key.
The following screen will appear:
b. Specify a name for th e RAID 10 set and press < Enter>.
c. When RAID Level i tem is highlighted, use the <Up Arrow >, <Down Arrow> keys
to select RAID 10 (RAID1 + RAID0) and hit <Enter>.
d. When the Stripe Size is hi ghlighted, use the <Up Arrow>, <Down A rrow> keys
to select the stripe si ze from 4 KB to 128 KB for your R AID 10 and hit <Enter>.
The default setting is 6 4K B. (Note: For a serve r, please use a lower stripe size,
and for a multimedia system, u se a higher stripe size.)
e. When the RAID Volume Capacity item is highlighted, enter your RAID volume
capacity and hit < Enter>. The default setting is the maximum capacit y allowed.
f. Press <Enter> when th e Create Volume item is highlighted. A warning message
displays.
g. When asked "Are you sure you want to create thi s volume (Y/N), pre ss "Y" to
create the RAID volume, or type "N" to go back to the Create Volume menu.