Suunto VYTEC DS manual Battery Indication, Battery Power Indicator

	m
bar	DIVE TIME
°C	TIME

Fig 3.3. Startup III. Sur- face mode. Depth and dive time are zero and cylinder pressure is 300 bar [4350 psi]. Pressing TIME button activates alternative display of temperature and current time.

Fig. 3.4. Startup IV. Gauge mode.

	m
bar	DIVE TIME

•the instrument displays correct units of measurement (Metric/Imperial)

•the instrument displays correct temperature and depth (0.0 m [0 ft])

•the buzzer beeps

IIf the optional wireless pressure trans-mitter is used (see chapter 2.4. Wireless pressure transmission) ensure that:

•the pressure transmitter has been- properly attached and that the cylinder valve is open

•the transmitter and the wrist unit have been properly paired on a suitable code

•the pressure transmitter is working (lightning symbol blinks, cylinder- pressure is displayed), and that there is no low battery warningdisplayed

•you have enough air for your planneddive. You should also check the pressure reading against your back-up pressure gauge.

And if set to Nitrox mode (refer to chapter 3.4 Diving in Nitrox mode), make sure that:

•the correct number of mixes are set and that the oxygen percentages are adjusted according to the measured Nitrox blends in your cylinders

•the oxygen partial pressure limits are set correctly.

The dive computer is now ready for diving.

3.1.2. Battery Indication

Fig. 3.5. Low Battery Warning. Battery symbol indicates that the bat- tery is low and battery replacement is recom- mended.

3.1.2.1. Battery Power Indicator

This dive computer has a unique graphic Bat- tery Power Indicator designed to give you an advance notice of impending need to change the battery.

18