Suunto VYTEC DS manual Dive History Memory 2 History, Dive Profile Memory Prof

DIVE

MAX

QUIT

DIVE TIME

Fig. 4.14. Dive History information. Total number of dives, dive hours and maximum depth.

DIVE PROFILE MEMORY [PROF]

The scrolling of the profile will start automati- cally when the Logbook page IV (PROF) is entered.

With the default setting, the dive profile is re- corded and displayed in 20-second increments with each display being shown for about three seconds. The depths shown are the maximum values of each interval.

Pressing any button stops the scrolling of the profile.

NOTE! Several repetitive dives are consid- ered to belong to the same repetitive dive se- ries if the no-flying time has not ended. See ”Dive Numbering” in section 3.6.2. for further information.

SELECT

Fig. 4.15. Data Transfer mode. [3 TR-PC].

QUIT

OPTIONS

Fig. 4.16. Dive Simulation options. [2 SIMUL].

4.1.2.Dive History Memory [2 HISTORY]

The Dive History is a summary of all the dives recorded by the dive computer. To enter the Dive History Memory Mode select MODE- 1 MEMORY- 2 HISTORY (Fig. 4.13.).

The following information will be shown on the display (Fig. 4.14.):

•the maximum depth ever reached

•the total accumulated dive time in hours

•the total number of dives.

The Dive History Memory can hold a maximum of 999 dives and 999 diving hours. When these maximum values are reached, the counters will start again from zero.

NOTE! The maximum depth can be reset to

0.0m [0 ft] using the optional PC-Interface unit and Suunto Dive Manager software.

48