OK
Fig. 4.23. Setting Altitude adjustment. Press scroll buttons to change altitude mode.
OK
Fig. 4.24 Setting Personal adjustment. Press scroll buttons to change personal mode.
OK
Fig. 4.25 Setting RGBM adjustment. Press scroll buttons to change setting.
4.3.1.Dive Parameter Settings [1 SET DIVE]
To enter the Dive Parameter Setting Mode select MODE- 3 SET- 1 SET DIVE. The Dive Parameter Setting mode has two to four op- tions depending on the dive computer mode. In Gauge mode there are two options, in Air mode three options and in Nitrox mode four options.
4.3.1.1Altitude Adjustment, Personal Adjustment, RGBM Set- tings and Safety Stop/ Deep Stop [1 AdJ MODE]
The current Altitude and Personal Adjustment modes are shown when diving and at the sur- face. If the mode does not match the altitude or personal conditions (see section 3.8. “High Altitude Dives and Personal Adjustment”), it is imperative that you enter the correct selec- tion before diving. Use the Altitude Adjustment to select the correct altitude mode. Use the Personal Adjustment to add an extra level of conservatism.
For certain divers and diving conditions you may want to set attenuated RGBM mode When this selection is made it is indicated with a con- tinuously displayed Diver Attention Symbol. The options are full RGBM effects (RGB100), and attenuated RGBM (RGB50).
The deepstop setting allows the user to choose between traditional safety stops or deep stops. If deep stops are set to OFF, traditional safety stop calculation is used. If set to ON itera- tive Deepstops will be prompted instead. The length of the individual deepstops can be set to 1 or 2 minutes.
To enter the Altitude Adjustment, Personal Ad- justment and RGBM effect Setting mode, se- lect MODE- 3 SET- 1 SET DIVE- 1 AdJ MODE.
52
