|
| m |
|
| MAX |
| AIR TIME | NO DEC TIME |
C |
|
|
B |
|
|
T | bar | DIVE TIME |
Fig. 3.10. Bookmark activation. An annotation, Bookmark, is placed
in the profile memory during a dive by pressing PLAN button. Note the Logbook symbol.
m
|
| MAX |
|
| STOP |
| AIR TIME |
|
C |
|
|
B |
|
|
T | bar | DIVE TIME |
Fig. 3.11. A three minute Recommended Safety Stop.
|
| m |
|
| MAX |
| AIR TIME | NO DEC TIME |
C |
|
|
B |
|
|
T | bar | DIVE TIME |
Fig. 3.12. Cylinder pres- sure warnings. Pressure has dropped below 50 bar [725 psi]. Pressure dis- play is blinking and there is an audible alarm.
•the Personal Adjustment setting on the left side of the center window with a diver symbol and + signs (P0, P1, or P2) (see Table 3.5.)
•the DiverAttention Symbol if attenuated RGBM has been set (see Table 3.3.)
•blinking Diver Attention Symbol if surface interval should be prolonged (see Table 3.3.)
In addition with the optional wireless transmis- sion enabled:
•the Remaining
•the cylinder pressure in bar [or psi] displayed in the lower left corner
Alternative displays by pressing the TIME but- ton (Fig. 3.9.):
•the current time, shown as TIME
•the water temperature in °C [°F]
NOTE! In Dive Mode the alternative display switch- es back to the main display after 5 seconds.
3.3.2. Bookmark
It is possible to make special marks in the profile memory during a dive. These Bookmarks will be shown as a dive log symbol when scrolling the profile memory on the computer display. The Bookmarks will also be shown as annotations in the
3.3.3. Cylinder Pressure Data
When using the optional wireless pressure transmitter the pressure of your scuba cylinder in bars [psi] will be shown digitally in the lower left corner of the display Anytime you enter into a dive, the remaining air time calculation begins. After 30 - 60 seconds (sometimes more, depending on your air consumption), the first estimation of remaining air time will be
24
