In case the transmitter battery is running low, a low battery warning “LOBT” will be transmitted and displayed intermittently with the pressure reading on the Vytec (Fig.2.6 d).
If the dive is started without that the Vytec and the transmitter have been properly paired, the Vytec will indicate that no cylinder data is available by displaying “OFF” (Fig. 2.6 e).
TABLE 2.1. PRESSURE TRANSMISSION RELATED DISPLAYS
Display | Indication | Figure 2.6 |
|
|
|
SETC | Set Code. No code stored, |
|
| wrist unit ready for pairing with transmitter. | a |
|
|
|
- - - | Pressure reading over 360 bar [5220 psi] | b |
|
|
|
FAIL | Indicates pressure reading has not been |
|
| updated in more than 1 minute. |
|
| Transmitter is out of range, in power saving |
|
| mode or on another channel. Activate the |
|
| transmitter by breathing off the regulator, |
|
| and recode the wrist unit if necessary. | c |
|
|
|
LOBT | Indicates pressure transmitter battery voltage | d |
| is low. Change the transmitter battery! |
|
|
|
|
OFF | Pairing has not been conducted before | e |
| start of dive. No cylinder data available. |
|
|
|
|
16
