SVAT Electronics CVDVR900 user manual Conversion Table for Image Quality and Encoding Rate

OPERATION INSTRUCTION continued

Conversion Table for Image Quality and Encoding Rate

Encode Method

					Image Quality (Encode Rate Kbit/Second)
	Sharpness		1	2	3	4	5	6	7	8
	D1	Fixed	2400	2200	2000	1800	1600	1200	1000	800
CBR	HD1	Fixed	1200	1100	1000	900	800	600	500	400
	CIF	Fixed	900	800	700	600	500	400	300	200
	D1	MAX	2400	2200	2000	1800	1600	1200	1000	800
		MIN	2000	1800	1400	1200	1000	800	600	400
VBR	HD1	MAX	1200	1100	1000	900	800	600	500	400
		MIN	900	800	700	600	500	400	300	200
	CIF	MAX	900	800	700	600	500	400	300	200
		MIN	600	600	500	400	300	200	200	100

HDD Store Mode: "Centralize, Individual, Compound" are 3 different hard disk storing modes available in here. Using the cursor to select and press [Enter] to confirm this function:

•Centralize: All video signal and sound signals are stored into same one hard disk, and then continuously with the next hard disk after the current one becomes full.

•Individual: Each channel of video signal and sound signals are stored into a different hard disk, for example channel 1 recording into HDD1, and channel 2 recording into HDD2.

•Compound: Channel 1 and 2 video and sound signal only record into HDD1 and HDD2, taking into HDD1 first and then using HDD2 after the HDD1 is full. At the same meaning that, Channel 3 and 4 video signal and sound signal only recording into HDD3 and HDD4, taking into HDD3 first and then using HDD4 after HDD3 full.

Return: Using the cursor to select and press [Enter] to confirm back to main menu.

A-3 Timer Record Setting:

Highlight and select "Timer Record", then press [Enter]for this selection, the sub-menu will shown (as below).

GENERAL SETTINGS	Timer Record		Settings
Record Settings	Ch	Timer	Motion_Mode
Timer Record
Motion Detection	1	On Off	On Off
Alarm Record	2	On Off	On Off
Channels	3	On Off	On Off
Housings	4	On Off	On Off
Network
Language
Exit

Timer Record: "On, Off" are the 2 different status settings. Use the cursor to select and press [Enter] to confirm this function. While timer selected, there will be 16 different setting tasks for timer setup in each channel (8 different day types, and 2 different period settings avail- able for each type):

Channel 1 Timer Record Settings

Date	Period 1	Period 2
Everyday	08:00-12:00 14:00-18:00
Mon	08:00-12:00 14:00-18:00
Tue	08:00-12:00 14:00-18:00
Wed	08:00-12:00 14:00-18:00
Thurs	08:00-12:00 14:00-18:00
Fri	08:00-12:00 14:00-18:00
Sat	08:00-12:00 14:00-18:00
Peak	08:00-12:00	14:00-18:00
Return