
CONNECTIONS
Connection to the TV
• Make one of the following connections, depending on the capabilities of your existing device.
AUDIO CONNECTION |
| VIDEO CONNECTION |
AUDIO / VIDEO CONNECTION
|
| Method 1 |
|
| Method 2 | *1 | |
TV |
|
|
|
|
|
| |
standard audio standard picture | better picture | ||||||
|
Method 3 | *1 |
| Method 4 | *1, 2 |
best picture | best audio / picture |
AUDIO IN | VIDEO | COMPONENT | DVI IN | |
R | L | VIDEO IN | HDMI IN | |
IN |
|
Y
(Green)
PB/CB
|
|
|
| (Blue) |
| |
|
|
| PR/CR | (Red) |
| |
| RCA |
|
|
| ||
|
|
|
|
| ||
| video |
| RCA | |||
RCA | cable |
| cable | |||
component | ||||||
|
| |||||
audio cable | and | or video cable | or | |||
this unit |
| (Green) |
| (Red) |
| |
|
|
|
|
| ||
| VIDEO |
|
|
|
| |
| OUT |
|
|
|
|
HDMI cable
or
|
|
| COMPONENT |
|
|
|
| VIDEO OUT |
|
|
|
| Y PR/CR |
|
|
|
| (Blue) |
|
|
|
| PB/CB |
|
| AUDIO OUT | VIDEO OUT | COMPONENT | HDMI OUT |
|
|
| VIDEO OUT |
|
*1 | This unit is compatible with the progressive scan system. The feature provides you with the higher quality pictures | |||
| than traditional output system does. To utilize this feature, a component or an HDMI connection is required. Refer | |||
| to “HDMI Video Resolution” or “Component Output” setting on page 34 to set the video resolution. | |||
*2 | Analog audio connection is not required for this connection. |
|
Supplied cables used in this connection are as follows:
•RCA audio cable (L/R) x 1
•RCA video cable x 1
•HDMI cable (High Speed HDMI Cable) x 1
Please purchase the rest of the necessary cables at your local store.
Note
•Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be distorted due to the
•If the picture is not output properly to the TV because of “HDMI Video Resolution” or “Component Output” setting, press and hold [ B PLAY] on the front panel for more than 5 seconds. “HDMI Video Resolution” and “Component Output” setting will be reset to the default automatically. You cannot change the video resolution during
•A simple
12 | EN |