Sylvania NB500SL9 Connecting the AC Cord, Audio signals output from DIGITAL OUT jack COAXIAL

CONNECTIONS

■Audio signals output from DIGITAL OUT jack (COAXIAL)

The audio signals currently output from HDMI OUT jack will be output from DIGITAL OUT jack as well, except that Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD.

When “Audio Mute” is selected in “HDMI Audio Out” setting, audio signals output from HDMI OUT jack will be muted and the audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting.

To set “Digital Out” setting, select “Audio Mute” in “HDMI Audio Out” setting.

Disc type	Audio recording format		“Digital Out” setting
		Bitstream		LPCM
	Dolby Digital	Dolby Digital		2ch Downmix LPCM
	Dolby Digital Plus	Dolby Digital		2ch Downmix LPCM
BD-video	Dolby TrueHD	Dolby Digital		2ch Downmix LPCM
	DTS	DTS*		2ch Downmix LPCM
	DTS-HD	DTS*		2ch Downmix LPCM
	LPCM	2ch Downmix LPCM*		2ch Downmix LPCM
DVD-video /	Dolby Digital	Dolby Digital		2ch Downmix LPCM
	DTS	DTS		2ch Downmix LPCM
DVD-RW/-R
(VR mode)	LPCM	2ch Downmix LPCM		2ch Downmix LPCM
audio CD		2ch LPCM		2ch LPCM
DTS-CD		DTS		2ch Downmix LPCM

*For BD titles with secondary or interactive audio, these audio will be output as Dolby Digital when all the conditions listed below are met:

•When “BD Audio Mode” setting is set to “Mix Audio Output”.

•When “HDMI Audio Out” setting is set to “Audio Mute”.

•When “Digital Out” setting is set to “Bitstream”.

If BD titles do not have secondary or interactive audio, the audio will be output as shown in the table.

• This table applies only when HDMI cable is not connected or “Audio Mute” is selected in “HDMI Audio Out” setting.

Note

•In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set “BD Audio Mode” setting to “Mix Audio Output” and set “HDMI Audio Out” setting to “HDMI Multi(LPCM)”.

Connecting the AC Cord

After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC cord to the AC outlet.

Insert the plugs securely. Incomplete connections will result in the generation of noise.

this unit AC outlet

AC 120V, 60 Hz

AC cord

Supplied cables used in this connection are as follows:

• AC cord x 1

16 EN