CONNECTING TO A RECEIVER WITH DOLBY DIGITAL DECODER
If using this DVD/VCR COMBINATION UNIT to play a DVD disc in 5.1 channel Dolby Digital surround, the DVD/VCR COMBINATION UNIT outputs a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the DVD/VCR COMBINATION UNIT up to a Dolby Digital receiver, you can enjoy a more convincing, realistic ambience with powerful and
Center speaker
Front speaker (left)
Receiver with
Dolby Digital Decoder
DVD/VCR | VCR |
| DVD |
AUDIO OUT |
| ||
| OUT VIDEO OUT | OUT | |
L |
| Y |
|
R | AUDIO IN | Cb | L |
|
|
| |
| VIDEO IN | Cr | R |
Front speaker
(right)To COAXIAL DIGITAL AUDIO OUT jack
To COAXIAL DIGITAL
AUDIO INPUT jack
DIGITAL
AUDIO OUT
COAXIAL
Surround
speaker (left)
Surround | Subwoofer |
speaker |
|
(right) |
|
[Fig. 5]
¡If the output is Dolby Digital audio, connect to a Dolby Digital decoder, and set DOLBY DIGITAL to ON for audio output in the setup mode.
¡Unless connected to a Dolby Digital receiver, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
Manufactured under license from Dolby Laboratories. “Dolby” and the
CONNECTING TO AN ANALOG AUDIO SYSTEM
DVD/VCR VCR | To AUDIO OUT jacks | OUT | DVD | AUDIO OUT |
VIDEO OUT OUT | ||||
AUDIO OUT |
| DIGITAL | ||
L |
|
| Y |
|
R | AUDIO IN | Cb | L L |
|
| COAXIAL | |
| VIDEO IN | Cr | RR |
Stereo system |
|
|
|
To Right (red) and Left (white) |
|
|
AUDIO INPUT jacks | [Fig. 6] |
or | |
To ANALOG AUDIO INPUT jacks |
|
| To Right (red) and Left (white) |
| ANALOG AUDIO OUT jacks |
Notes
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Owner's Manuals for stereo systems and any other components to be connected to the DVD/VCR COMBINATION UNIT.
– 15 – | EN |
1L25