Figure 6-21Hot-Swap of 2U Server Power Supply Module
5.Slide the replacement module into the power supply.
6.Press firmly and evenly on the power module until you feel the module seat in the back of the power supply
6.11Replacing a Hot-Swap Hard Drive
The system's hard drive Hot-Swap feature enables you to remove a hard drive without shutting down the operating system or turning off the system power. The way in which you remove a hard drive depends on the application you are using and whether you are replacing a drive, adding a new one, or removing a drive permanently.
When you remove a drive using the Hot-Swap operation, you need to stop the hard drive and take it offline to remove the logical software links to the hard drive, and to reconfigure the file system so that it will now ignore the removed drive. You might also have to reconfigure your application software to operate without the removed drive. Therefore it is strongly recommended that you contact TAG Technical Support at tech.support@tag.com before attempting to Hot-Swap a hard drive. For more information on contact information see document back page.
SV-2000-X2 Server (CENTRIX / JHSV)
Part Number: 1008080Page 55 of 82
Version 1.4. 01/12/2010
