![](/images/new-backgrounds/1147429/147429111x1.webp)
Operations Manual
6.11.1 146GB SAS Hard Drive
Figure 6-22 146GB SAS HDD (Removed from HD Carrier)
6.12 Removing the Server Cover
The location of the mounting screws securing the Server cover varies per Server model. To remove the cover, use a Phillips screwdriver to remove all screws from the sides and top of the cover.
NOTE: It is important to make note of the location from which screws are removed since different screw lengths may be used to secure the cover.
CAUTION
It is not safe to operate TAG Servers without the cover in place. Failure to take this precaution may result in personal injury and system damage.
6.13 Adding or Replacing System Memory
| This section lists the procedures for adding or |
| replacing system memory. |
Part Number: 1008080 | Page 56 of 82 |
| Version 1.4. 01/12/2010 |