TAG SV-2000-X2 manual Ultrium 920 Tape Drive, Remove Tape Drive, Install Tape Drive

Operations Manual

6.15 Ultrium 920 Tape Drive

The Ultrium 920 delivers a compressed storage capacity of 800GB per data cartridge and a compressed data transfer rate of 432GB per hour. The Ultrium 920 Tape Drive is fully read and write.

6.15.1Remove Tape Drive

1.Turn off all power to the server and remove power cables from their power source.

2.Unscrew the four (4) thumb screws holding the Tape Drive into place.

3.Pull the Tape Drive body slightly toward the front of the server and then tilt upward.

Note: Pulling slightly forward will take it from under the Server top cover.

4.When Tape drive body is in the upright position remove all cable connections. Then remove Tape Drive.

5.Pull the top cover off the tape drive body.

6.Remove the four (4) retaining screws that are holding the bottom cover on to the Tape Drive.

6.15.2Install Tape Drive

7.Install the bottom cover and its four (4) retaining screws.

8.Replace the Tape Drive top cover.

SV-2000-X2 Server (CENTRIX / JHSV)
Part Number: 1008080	Page 59 of 82
Version 1.4. 01/12/2010