Control Panel > Network Settings > LAN Settings
SNMP Settings
TANDBERG 1700 MXP USER GUIDE
CANCEL
Select this icon and press OK to leave the menu undoing any changes.
RESTORE DEFAULTS
Select this icon and press OK to restore the default settings.
Save
Select this icon and press OK to leave the menu putting changes into effect.
SNMP Trap Host
Identifies the
Traps can be sent to multiple SNMP Trap Hosts. Enter the IP address of up to three SNMP man- agers. All traps will then be sent to the hosts listed.
SNMP Community
Used to authenticate SNMP requests. SNMP requests must have a ‘password’ in order to receive a response from the SNMP agent in the codec.
Note! The SNMP Community name is
case sensitive. The default password is public
D 13954.01 | 119 |
MAY 2006 |