Video Meeting Features
Snapshots
TANDBERG 1700MXP USER GUIDE
About Snapshots | Taking a Snapshot Using the Menu |
|
The system can take a snapshot of your live video. Snapshot is handy when you are in a call with a system that does
not support Dual Video Stream. Use Snapshot to show a snapshot of your presentation and continue the meeting with main camera.
The following should be observed:
•This system can send snapshots in a
•When displaying a snapshot, it will always be the latest snapshot taken that is displayed, regardless of which end (near or far) it was that took it.
•Any snapshot taken is deleted once the call is terminated.
•The Snapshot feature uses H.261 Annex D. Consequently it will fail to work when using H.264 video compression.
In a call click OK to produce the menu line, if needed, and navigate to the Presentation icon.
Click OK to display the Presentation menu. Navigate to Snapshot tab and then down to the Take New Snapshot icon. Click OK to take a snapshot and send it to the far end.
Taking a Snapshot Using the Remote Control | Displaying a Snapshot |
•In a
Note! If the Number Key Settings menu has been set to Touch Tones, pressing the Snapshot key will not be inter- preted as snapshot, but as a touch tone.
The Number Key Settings must be set to something else to make the Snapshot key work. This is done in the Control Panel of your system. Your system adminstrator may have password protected this area.
Note! Likewise, this will not work when you are in an input field requiring numerical or alphanumerical entries. The * will then be interpreted as *.
In a call click OK to produce the menu line, if needed, and navigate to the Presentation icon.
Do as above, but select Display Snapshot instead. Click OK to display the snapshot.
D 13954.01 | 47 |
JUNE 2006 |