TANDBERG 1700 MXP manual System Name Settings, Entering a system name

Control Panel > General Settings

System Name Settings

TANDBERG 1700 MXP USER GUIDE

CANCEL

Select this icon and press OK to leave the menu undoing any changes.

RESTORE DEFAULTS

Select this icon and press OK to restore the default settings.

Save

Select this icon and press OK to leave the menu putting changes into effect.

System Name

Identifies the system:

•On the welcome screen of your system

•During an MCU conference call

•When using the Web-interface

•When the codec is acting as an SNMP Agent

•Towards a DHCP server

•As H323 ID. If H.323 ID is configured in H.323 settings, it will be used instead of System Name.

System Name is blank by default, can be alphanumeric, and up to 50 characters long.

Entering a system name

Whenever alphanumerical entries are expected by the system, a small abc appears in the right lower corner of the entry field.

In this mode, entries from the Numerical keypad are automatically interpreted as alphanumeric entries in the same way as on a cellular phone.

Guidelines:
• Press the key that corresponds to the required letter.
		Presets
• Press the key as many times as needed to access the
correct letter.
• Change to lower or back to upper case letters with the# a/A
key, and space with the 0 _ key.
• To write numbers in a text input field, repeatedly press the
	Snapshot		Touch tones
corresponding key a number of times until the digit appears.

International Name

If the System Name contains Asian and non-standard ASCII character text input (includes even languages like Norwegian, French, Polish etc.), an International Name using standard ASCII characters only, must be specified as well.

If you set the language to e.g. Korean and input a System Name using Korean characters, the International Name field allowing you to specify the name using standard ASCII character set will appear.

D 13954.01	63
MAY 2006