Call Handling
Making Point-to-Point Video & Telephone Calls Manually
Making Video Calls Manually
TANDBERG 1700 MXP USER GUIDE
Select Make a Call from the menu,
or, press the green Call key on the remote control.
The TANDBERG system can make both Video calls and Telephone calls. Telephone calls over IP may require additional hardware and infrastructure. If in doubt contact your administrator or your TANDBERG representative.
Make sure Video Call is selected (as shown here). If not,
see below for details.
EnterKeypad.the dial number manually using the Numerical
When dialling manually, observe the guidelines given in Numerical Keypad Features. Use * as separator in IP addresses. If a system is registered on a gatekeeper or border controller with DNS support, there are several ways to call into the system:
•<IP address>
•<E.164>
•<H.323 ID>
•<H.323 ID>@<domain>
•<E.164>@<domain>
See H.323 Settings for details
Do one of three things:
• Place the call by pressing OK so that the Place Call icon is selected and press OK once again
• Use the Arrow keys on the remote control to select the Place Call icon and press OK
• Press the green Call key on the remote control.
Making Telephone Calls Manually
Do as described above for a video call, but make sure Telephone Call is selected.
Choosing Between Video and Telephone Call
Use the Arrow keys, navigate to the Call Type icon, and click OK. Select the type of call and click OK to exit the submenu.
D 13954.01 | 26 |
JUNE 2006 |