Administrator Settings

4.4.7Default Call Settings

Default Call Settings are connected with Call Settings in the call menu. If you leave Call Settings unchanged when making a call, the system will use the Default Call Settings in the call.

In addition to the Call Settings Call Type, Net, Bandwidth and Restrict (56k), you also find settings for H.320 Auto bandwidth and H.323 Auto bandwidth in Default Call Settings.

Call Type

Call Type can be set to:

Video Call

Telephone Call

If either the Call Type is set to Telephone Call or the Place Telephone Call icon is selected when making a call, the call will be set up as a telephone call. In all other cases the call will be set up as a video call.

Some network configurations may cause the setup of a video call to fail. The call will then be set up as a telephone call instead if Fallback to Telephony is enabled.

For MultiSite calls, Call Type enables you to specify both telephone calls and video calls in the same conference.

Network

The Network alternatives are:

Auto

ISDN

H.323

SIP

 

 

If Auto is selected, the system will select the right network depending on the entered number:

If an IP-address (e.g. 10.12.34.56 ) is entered, H.323 is selected.

If the first digits in the number match those set in H.323 Prefix, H.323

is selected.

In other cases, ISDN (H.320) is selected.

ISDN indicates:

ISDN-BRI

ISDN-PRI

Leased E1/T1

External Networks

If a gatekeeperis present, it is possible to place IP-calls using telephone- style numbers, e.g. an E.164 alias, according to the numbering plan implemented in the gatekeeper. The gatekeeper will then translate the dialed

165

Page 165
Image 165
TANDBERG 6000MXP user manual Default Call Settings, Call Type