TANDBERG 6000MXP user manual Signal Assignment

TANDBERG 6000 MXP Profile

DVI-D cables transmit digital T.M.D.S. signals, DVI-A cables transmit analog VGA signals and DVI-I cables can transmit either digital or analog signals.

It is possible to extend existing DVI cables by the use of extension cables. The maximum cable length however, is 5 meters. Going beyond that may result in quality loss.

DVI-I - Combined Analog and Digital Connector Pin Assignments:

Pin	Signal	Pin	Signal	Pin	Signal
	Assignment		Assignment		Assignment
1	T.M.D.S.	9	T.M.D.S.	17	T.M.D.S. Data0-
	Data2-		Data1-
2	T.M.D.S.	10	T.M.D.S.	18	T.M.D.S. Data0+
	Data2+		Data1+
3	T.M.D.S.	11	T.M.D.S.	19	T.M.D.S.
	Data2/4 Shield		Data1/3 Shield		Data0/5 Shield
4	T.M.D.S.	12	T.M.D.S.	20	T.M.D.S. Data5-
	Data4-		Data3-
5	T.M.D.S.	13	T.M.D.S.	21	T.M.D.S. Data5+
	Data4+		Data3+
6	DDC Clock	14	+5V Power	22	T.M.D.S. Clock
					Shield
7	DDC Data	15	Ground (return	23	T.M.D.S. Clock+
			for +5V, HSync
			and VSync)
8	Analog Vertical	16	Hot Plug Detect	24	T.M.D.S. Clock-
	Sync
C1	Analog Red	C2	Analog Green	C3	Analog Blue

C4

Analog

Horizontal

Sync

C5

Analog Ground (analog, R, G & B return)

222