TANDBERG 6000MXP user manual For stereo recording, connect

		Peripheral Equipment
For stereo recording, connect:
		Video cable between Video Out 2 on the system to Video In on the VCR
		Audio cable between Audio Out 2 (VCR L) to VCR/DVD Audio In (L)
		Audio cable between Audio Out 3 (VCR R) to VCR/DVD Audio In (R)
Make		sure that:
		That Stereo I/O Mode is set to On
		128 AAC-LD is enabled
		That AAC-LD is enabled
		To enable VCR/DVD ducking (reduce volume when speaking), check that VCR Ducking

under Audio Settings is set to On.

When recording, the VCR will record the video as it appears on the main monitor, the local audio and the audio from the far end.

Note that a system with one video output and one mixed (local and far end) audio output is required for recording. For playback, a system with one video input and one audio input without integrated echo cancellation is required.

233