TANDBERG 6000MXP user manual Using the web interface, Using FTP, Using Isdn

TANDBERG 6000 MXP Profile

6.15 Appendix 15

System Upgrade

Before starting the software upgrade of the TANDBERG MXP system, please make sure to have the new software file, (for instance s050000F30.pkg) and the Release Key for this software available. Your TANDBERG Partner will provide this for you.

All options and settings will automatically be stored when upgrading, so no backup is necessary.

If the system upgrade process is aborted before it's complete, the system will work as normal with the original software

The TANDBERG MXP systems can be upgraded in three different ways;
	Using the web interface
	Using FTP
	Using ISDN

A) To upgrade using the the web interface, please do the following steps:

1.Type the IP address of the TANDBERG MXP system that shall be upgraded (for instance 10.0.8.77) in a standard browser, such as Internet Explorer 6.0.

2.The web interface of the codec will ‘then be displayed’ . Select the ‘System Configuration’ tab on top of the page, and then the sub-tab Upgrade .

The following page will now be displayed:

276